You can switch to Smart Mode in two different ways, depending on where you are in the setup or playing process.

1. Switching to Smart Mode in the guitar app

First time using the guitar app: If you are connecting the AeroBand Guitar to your phone via Bluetooth for the first time, the app will guide you through the setup process. During this initial connection flow, you can choose Smart Mode directly.
Not the first time using the guitar app or already familiar with the initial setup instructions: If you have already completed the first-time setup, you can switch to Smart Mode in the guitar app by following the steps below: 1. Open the guitar app and register or log in to your account → 2. Connect your AeroBand Guitar to the app via Bluetooth → 3. Tap the "Smart" button in the upper-left corner of the app screen.

2. Switching to Smart Mode with the guitar button

You can also switch to Smart Mode with the "Tone" button of the AeroBand Guitar by following the steps below: 1. Open the guitar app and register or log in to your account → 2. Connect your AeroBand Guitar to the app via Bluetooth → 3. Press and hold the "Tone" button for 2-3 seconds.

2.1.2 Switching to Auto Mode with the Guitar Button.png

If you're switching to Smart Mode this way, please make sure:

Your AeroBand Guitar is already successfully connected to the app via Bluetooth.
The guitar app is open and paired properly.
Hold the button long enough to switch modes.

If the mode does not change immediately, check whether the Bluetooth connection is stable and try again.

If you are already familiar with the app interface, this may be the most intuitive method.