1. What is Smart Mode?

Smart Mode is an easier playing mode for guitar beginners, with simplified hand movements. It allows you to play guitar chords with easier finger placements and strumming patterns. With this mode, you can play your favorite songs in just a few minutes.

Before entering the Smart Mode Singing & Playing section, let’s first understand what Smart Mode is: 

• In traditional guitar playing, the left hand usually needs to press 1 to 4 fingers on the fretboard to change the pitch, while the right hand needs to pluck or strum the strings multiple times to produce sound.
• Smart Mode simplifies the usual playing movements of both hands, while still allowing you to create pleasant-sounding accompaniment for singing and playing.
• Smart Mode is designed for accompanying vocal melodies and lyrics while singing.

2. How do I switch to Smart Mode?

You can switch to Smart Mode in two different ways, depending on where you are in the setup or playing process.

2.1 Switching to Smart Mode in the app

• First Time Using the app: If you are connecting the AeroBand Guitar to your phone via Bluetooth for the first time, the app will guide you through the setup process. During this initial connection flow, you can choose Smart Mode directly.
• Not the first time using the guitar app or already familiar with the initial setup instructions: If you have already completed the first-time setup, you can switch to Smart Mode in the app by following the steps below: 
• Open the guitar app and register or log in to your account →Connect your AeroBand Guitar to the app via Bluetooth → Tap the "Smart" button in the upper-left corner of the app screen.

2.2 Switching to Smart Mode with the Guitar Button

You can also switch to Smart Mode with the "Tone" button of the AeroBand Guitar by following the steps below: 

• Open the guitar app and register or log in to your account.
• Connect your AeroBand Guitar to the app via Bluetooth.
• Press and hold the "Tone" button for 2-3 seconds.

If you're switching to Smart Mode this way, please make sure:

• Your AeroBand Guitar is already successfully connected to the app via Bluetooth.
• The guitar app is open and paired properly.
• Hold the button long enough to switch modes.

If the mode does not change immediately, check whether the Bluetooth connection is stable and try again.

If you are already familiar with the app interface, this may be the most intuitive method.

3. How to play in Smart Mode?

To play in Smart Mode, you should first familiarize yourself with how it works and the features of the guitar app.

3.1 Smart Mode: Frets, Chords, and Songs

1. Frets and Chords

• In Smart Mode, only the first seven frets on the AeroBand Guitar light up. The colors from the 1st to the 7th fret are green, blue, orange, purple, light blue (Tiffany blue-like), yellow, and pink.
• Each fret corresponds to a specific chord. When you pluck any of the six strings on a fret, its indicator light becomes brighter, and the corresponding arpeggiated chord is played.
• For example, if the 1st fret (green) is assigned to a C chord, plucking any string on that fret will trigger the arpeggiated C chord. 

2.  Play songs

Once your AeroBand Guitar is successfully connected to the guitar app via Bluetooth, you can start playing songs by following the steps below:

• Tap the Songs section in the guitar app.

• Browse or search for the song you want to play.

• Tap the version you want to perform (some songs may have multiple versions).

If the song or version you want is not available in the Song Library, you can submit your score request by following these steps:

• Tap the Request button in the lower-right corner of the app.
• Fill in the required information for your requested score.
• Tap Submit.

3. Chord Display and Layout in Smart Mode

• After entering the song page, you will see seven chord blocks at the bottom. These correspond to the first seven frets on the AeroBand Guitar and follow the same color order.
• In Smart Mode, each song uses up to seven chords. The chord blocks displayed in the center of the screen indicate the chords you need to play during the song.

3.2 Smart Mode Playing Guidance

• On the song page, when the first chord is a B chord, an arrow in the chord layout below points to the corresponding colored blocks, indicating where to play.

• After you play the B chord, the arrow moves to the next chord in advance, and the next chord block begins to fill. When the fill is complete, playing the chord will smoothly transition to the next chord block.

• This process continues in sequence, forming the core logic of Smart mode.

3.3 Smart Mode Song Page Guide

After entering the song page, several control options are available.

3.3.1 Top-Left Controls

From left to right, you can:

1. View the original key of the song.
2. Adjust the Capo to transpose the song up or down.
3. Select the time signature of the song.
4. Adjust the BPM (tempo) of the song.
5. Preview a segment of the song’s accompaniment to help determine the appropriate key.

3.3.2 Song Sections

On the right side of the guitar app, you can find the Section option. Open it to view the different sections of the song. You can select a section and start playing directly.

3.3.3 Mixer

Tap the Mixer icon in the upper-right corner to open the mixer.

You can adjust the volume of each element according to your preferences, including the Intro & Interlude, Melody, Bass, Metronome, and Drum.

3.3.4 Recording

Tap the Recording icon to access the recording feature.

You can choose the option that best fits your needs: audio or video recording.

Note: The recorded files are stored locally on your phone. Currently, audio recordings are still saved in MP4 format, but they will be changed to MP3 format in a future update.

3.3.5 Playing Settings

Tap the icon in the upper-right corner of the guitar app to enter the settings page.  You can adjust the following options, which are arranged from top to bottom and left to right:

1. Intro & Interlude Tone
   You can choose piano or guitar as the tone for the intro and interlude, or use the system's default tone.
2. Melody
   You can choose piano or guitar as the melody tone for sections other than the intro and interlude, or use the system default tone.
3. Judgment
   You can receive feedback on each performance and an overall evaluation after you play.
4. Playing Scene
    You can choose the playing scene as Normal, Uninterrupted, or Performance.
    Normal: Requires playing the correct chord to continue the song. 
    Uninterrupted: If an incorrect chord is played, both the incorrect and correct chord sounds will play, and the song continues. 
    Performance: Produces the correct chord as long as you keep the rhythm.
5.  Playing
   Constant Speed: Chord blocks fill at a steady rate.
   Beat: Chord blocks fill in sync with the beat.
6.  Lyric Font Size
   Adjust the size of the lyrics and chord blocks.
7. Auto
   When enabled, the drums automatically turn on or off based on the song section.
8. Sheet
   Choose between the new and old sheet styles.

You can adjust these settings to suit your playing needs.

3.3.6 Style Presets

In the Style Presets section, two preset options are available: Official Presets and Custom Presets.

• Official Presets: The Tone, Rhythm pattern, and Loop are preconfigured. Simply select your preferred style.
• Custom Presets: You can customize the Tone, Rhythm pattern, and Loop to suit your preferences.

Available options include:

1. Pluck

• Tone: You can select from the built-in tones available on the AeroBand Guitar.
• Rhythm pattern: Includes pluck styles. You can choose your preferred style from the available options.

2. Strum

• Tone: You can select from the built-in tones available on the AeroBand Guitar.
• Rhythm pattern: Includes strum styles. You can choose your preferred style from the available options.

3. Drum

• Tone: You can choose from the following three drum sounds: Drum Pop, Drum Rock, Drum 808
• Rhythm pattern: Includes many different styles. You can choose your preferred style from the available options.

4. How to Use Drum Loop in Smart Mode?

In Smart Mode, you can enable the drum loop to enhance your playing and create a more complete performance experience.

4.1 Using the Mic Volume Button

You can enable the drum loop by long-pressing the Mic Volume button on the AeroBand Guitar.

This is a quick and direct way to turn on the drum loop during your practice or performance.

4.2 Using Fret Trigger (Recommended)

You can also trigger the drum loop by playing the 8th to 11th frets on the AeroBand Guitar. Refer to the diagram below for an example.

This method allows you to control the drum loop directly from the guitar, making it more natural during playing. Depending on your playing habits, this can provide a smoother and more integrated performance experience.

For more advanced control, you can lightly tap the 12th fret three times with your left hand to trigger a drum loop. The tempo of the drum loop is determined by the interval between the three taps, allowing you to set the rhythm manually.

By understanding how Smart Mode works and exploring the related features in the guitar app, you can quickly start playing your favorite songs and enjoy performing in Smart Mode.

Keep practicing, explore different styles and settings, and make the most of all available features to enhance your playing experience. Whether you’re a beginner or an advanced player, Smart Mode offers a fun and intuitive way to enjoy music.

Want to know more?

▶ Video guides:

👥 Connect with other users:

🌐 Official social media channels:

For additional assistance, please refer to the included manual or contact AeroBand customer support at support@aeroband.net.