The AeroBand Guitar features five buttons.

1. On the headstock, there are three buttons:

1.1 CAPO

Two round ones labeled "CAPO+" and "CAPO-" for pitch adjustment (press to raise or lower the pitch)

1.2 TONE

1.2.1 One long oval button labeled "TONE" for switching the built-in tones.

1.2.2 The function of the "TONE" button changes depending on the different Soundbank and firmware versions. When pressing the "TONE" button:

Switch Drum Tone. Indicates the firmware version is V30302042 or later, and the Soundbank version is 308 or later.
No change occurs. Indicates the firmware version is V30302042 or later, and the Soundbank version is below 308.
Switch Drum Rhythm. Indicates the firmware version is below V30302042, and the Soundbank version is below 308.

2. On the side of the guitar, there are two control knobs:

2.1 The microphone knob

Rotate to adjust microphone volume, press to enter Loop Mode, which repurposes the headstock buttons for tempo control and rhythm patterns.

2.2 The power knob

Rotate to adjust guitar volume, press and hold to power the device on or off.

Note: Currently, the AeroBand Guitar only supports adjusting the master overall volume. Individual volume control for different tones and sounds is not available.