The AeroBand Guitar features a built-in capo function integrated into the headstock buttons. You can adjust the capo position using these buttons.
On the headstock of your guitar, you will find two round buttons labeled "CAPO+" and "CAPO-". When you use "CAPO+" or "CAPO-", the guitar automatically shows the transposed fret through the LED indicator:
- Press "CAPO+" to raise the key, or "CAPO-" to lower the key.
- After each press, the LEDs on the fretboard will light up briefly to indicate the new capo position (1st fret, 2nd fret, 3rd fret, etc.).
- The light will stay on for a few seconds and then turn off automatically.
- Even though the LEDs turn off afterward, the capo setting remains active until you reset it.
This means the LEDs are only used to show the capo position when you change it, not to stay on permanently.
If you want to check the current capo level again, press the "CAPO+" or "CAPO-" button once, and the LEDs will show the position again.
Note: Currently, our AeroBand Guitar's capo function supports 25 keys.
Want to know more?
▶ Video guides:
👥 Connect with other users:
🌐 Official social media channels:
For additional assistance, please refer to the included manual or contact AeroBand customer support at support@aeroband.net.