If your AeroBand Guitar crashes, behaves abnormally, or if a firmware update fails, you can restore the device to its factory settings by following the steps below.
When should I reset the AeroBand Guitar?
- The device crashes or becomes unresponsive
- The program behaves abnormally
- Firmware update fails or cannot be completed
Reset Steps:
- Ensure the guitar is powered on.
- Press and hold both the Microphone knob and the Main knob simultaneously.
- Hold both knobs for approximately 20 seconds.
- The red power indicator light will begin flashing rapidly.
- Keep holding until the guitar restarts automatically.
Once the restart is complete, the guitar will be restored to its original factory settings.
Notes:
- Do not release the knobs before the red power light flashes rapidly.
The reset process will restore the device to its default settings without damaging it.
- After resetting, you can reconnect the device and re-pair it with the AeroBand Guitar app if needed.
Want to know more?
▶ Video guides:
👥 Connect with other users:
🌐 Official social media channels:
For additional assistance, please refer to the included manual or contact AeroBand customer support at support@aeroband.net.